Unable To Add Server #272
Replies: 19 comments
-
SirCoolness wrote at May 24 2016 19:47:13 UTC: do you have the FDQN defined properly? also make sure that you accepted the certificate. |
Beta Was this translation helpful? Give feedback.
-
MatrixTunnel wrote at May 24 2016 19:47:13 UTC: The FDQN is my public IP. If I try to change it to localhost (127.0.0.1 or similar) it wont let me. Accept the certificate? I don't think I saw anything about that in the installation instructions |
Beta Was this translation helpful? Give feedback.
-
SirCoolness wrote at May 24 2016 19:47:13 UTC: wait where is it giving you this error? |
Beta Was this translation helpful? Give feedback.
-
MatrixTunnel wrote at May 24 2016 19:47:13 UTC: When I try to create a server: http://prntscr.com/b7zs6l |
Beta Was this translation helpful? Give feedback.
-
SirCoolness wrote at May 24 2016 19:47:13 UTC: did you auto-deploy the node? |
Beta Was this translation helpful? Give feedback.
-
MatrixTunnel wrote at May 24 2016 19:47:13 UTC: Yes. I had to add the config for scales manually but I didn't get any errors |
Beta Was this translation helpful? Give feedback.
-
SirCoolness wrote at May 24 2016 19:47:13 UTC: i mean did you execute the auto-deploy script? |
Beta Was this translation helpful? Give feedback.
-
MatrixTunnel wrote at May 24 2016 19:47:13 UTC: "Auto-Deployment Script" Yes |
Beta Was this translation helpful? Give feedback.
-
SirCoolness wrote at May 24 2016 19:47:13 UTC: ok does your server node list look somthing like this. (pay attention to the green dot). |
Beta Was this translation helpful? Give feedback.
-
MatrixTunnel wrote at May 24 2016 19:47:13 UTC: It's a red x for me |
Beta Was this translation helpful? Give feedback.
-
SirCoolness wrote at May 24 2016 19:47:13 UTC: ohh thats the problem, you need it to be green for it to connect. are you using docker? |
Beta Was this translation helpful? Give feedback.
-
MatrixTunnel wrote at May 24 2016 19:47:13 UTC: Yes I am (I have to wait 120 second between posts D:) |
Beta Was this translation helpful? Give feedback.
-
SirCoolness wrote at May 24 2016 19:47:13 UTC: try disabling docker and run the new "Auto-Deployment Script". this is most likely caused from your machines incompatibility with docker. |
Beta Was this translation helpful? Give feedback.
-
MatrixTunnel wrote at May 24 2016 19:47:13 UTC: Ok. I ran the command and if says it installed everything (no errors) and the node still has an x |
Beta Was this translation helpful? Give feedback.
-
SirCoolness wrote at May 24 2016 19:47:13 UTC: make sure that scales is not running when your installing the updated script. |
Beta Was this translation helpful? Give feedback.
-
MatrixTunnel wrote at May 24 2016 19:47:13 UTC: I stopped docker and scales before running the script |
Beta Was this translation helpful? Give feedback.
-
SirCoolness wrote at May 24 2016 19:47:13 UTC: hmm, try deleting the node and make a new one, see if that does it. |
Beta Was this translation helpful? Give feedback.
-
MatrixTunnel wrote at May 24 2016 19:47:13 UTC: Do these settings look ok? http://prntscr.com/b803rq |
Beta Was this translation helpful? Give feedback.
-
SirCoolness wrote at May 24 2016 19:47:13 UTC: yep seems alright. also make sure port 5656 is open. if your using a vps its most likely already open. |
Beta Was this translation helpful? Give feedback.
-
MatrixTunnel wrote at May 24 2016 19:47:13 UTC:
Everything has been installed with no errors so far but when trying to create a server, it gives me this error:
"An error occurred while trying to connect to the remote node. Please check that Scales is running and try again."
Scales is running (started with sudo)
Dist: Ubuntu 14.04.4
Logs:
PufferPanel:
http://paste.ee/p/PQgFD
Scales:
http://paste.ee/p/KthAs
NGINX: None
php5-fpm:
http://paste.ee/p/vyHzY
Beta Was this translation helpful? Give feedback.
All reactions